This content is current only at the time of printing. This document was printed on 24 January 2020. A current copy is located at https://apvma.gov.au/node/2879
You are here
Standard for aluminium phosphide active constituent
the material shall consist of a mixture containing aluminium phosphide together with suitable additives to control the evolution of hydrogen phosphide (phosphine gas) and to prevent self-ignition
6.1 Active constituent: aluminium phosphide content shall be declared; the mixture usually contains 550 to 860 g/k of aluminium phosphide
6.2 Toxicological Impurities: arsenic: 0.04 g/kg maximum, corresponding to maximum 0.1 g/kg in the phosphorous used in the production of metal phosphide.
- The analytical method used for the determination of the active constituent and toxicological significant impurities must be validated in accordance with the APVMA guidelines for the validation of analytical methods.
- The APVMA guidelines on validation of analytical methods state that 'Analytical methods described in CIPAC handbooks and AOAC International Manual, and in recognized pharmacopoeias [BP, BP (Vet), Ph Eur and USP] for a particular active constituent or formulation are regarded as validated and do not require revalidation'. However, the suitability of these methods must be verified under actual conditions of use ie, the selectivity and accuracy of the method should be demonstrated for the published method when applied to the relevant sample matrix and laboratory conditions.
- When a CIPAC or AOAC method is used for the assay of an active constituent in a bulk active constituent, there is no matrix. The registrants need to check the specificity of the method to ensure there is no interference from impurities or degradation products. However, determination of accuracy of the method is not required as there is no potential for the product matrix to have an effect on the determination of the active constituent. However, when a CIPAC or AOAC method is used for the assay of an active constituent in a formulated product, determination of both specificity and accuracy is required as the matrix is relevant in formulated products (formulated products have different composition and quantities of excipients).
- Unless the scope of the collaborative method (CIPAC and AOAC) also includes toxicologically significant impurities in the active constituent, validation data for impurities are required.