Licensed Australian manufacturers of veterinary chemical products

Address: 

9–11 Platinum Street

Crestmead QLD 4132

Product Types:

Category 4: Medicated blocks

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing: (physical), storage and release for supply.

Date of issue:

12/1/2018

Address:

Level 1, 67–73 Missenden Rd

Camperdown NSW 2050

Product types:

Category 2: Spray, aerosols, liquids, suspensions, cream, gels, ointments, paste; capsule (hard shell), powder and granules.

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, capsule filling from bulk, aerosol filling from bulk, freeze-drying, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address: 

18 Distribution Place
Seven Hills NSW 2147

Product Types:

Category 6: (Single step manufacture)

Step(s) of manufacture:

Packaging (primary, strip, blister and sachet), labelling and storage.

Date of issue:

28/2/2020

Address: 

6D Narabang Way
Austlink Corporate Park
Belrose NSW 2085

Product Types:

Category 6

Step(s) of manufacture:

Packaging and labelling.

Address:

131 Station Road
Seven Hills NSW 2147

Product types:

Category 6: products in sealed containers or packages

Step(s) of manufacture:

Secondary packaging, secondary labelling, storage, and release for supply.

Address:

19 Gantry Place
Braemar NSW 2575

Product types:

Category 2 - creams/lotions, ointments, pastes, powders, sprays, liquids and pellets.

Category 4 - Premixes and supplements.

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, pelleting, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

8 Roseworthy Road
Roseworthy SA 5371

Product types:

Category 4: Premixes, supplements and custom mixes

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

7 Durham Street
Forbes NSW 2871

Product types:

Category 2: Pellets
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, dry milling, pellet extrusion, packaging, labelling, strip, blister or sachet packaging, storage, and release from manufacture only (partial release).

Address:

12 Gildea Lane
Bendigo East VIC 3550

Product types:

Category 1: Immunobiologicals (bacterial vaccines)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, formulation including blending, aseptic filling, sterilisation (heat), microbiological reduction treatment (heat, chemical), packaging, labelling, analysis and testing (physical, chemical, microbiological, sterility test), storage and release for supply.

Address:

60 Pile Road
Somersby NSW 2250

Product types:

Category 2: (Non sterile veterinary preparations other than ectoparasiticides, premixes and supplements)—palatable ingestible chews

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, filling, packaging, labelling, blister and sachet packaging, pellet extrusion, analysis and testing (physical, chemical and endotoxin), storage and release for supply.

Address:

105–113 Bronte Road
Bondi Junction NSW 2022

Product types:

Category 1: Sterile products for injection

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, aseptic filling, packaging, secondary packaging, labelling, sterilisation (heat, filtration), analysis and testing (physical, chemical, endotoxin, microbiological and sterility), storage and release for supply.

Address:

28 Mareno Road
Tullamarine VIC 3043

Product types:

Category 1: Immunobiologicals

Step(s) of manufacture:

Quality assurance (QA) of raw materials, aseptic filling, secondary packaging, labelling, storage and release for supply.

Address:

29 Wongajong Road
Forbes NSW 2871

Product types:

Category 4: Premixes and supplements

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, pellet extrusion, storage and release for supply.

Address:

Unit 10, 2–8 South Street
Rydalmere NSW 2116

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical and microbiological).

Address:

22 Dalmore Drive
Scoresby VIC 3179

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical, microbiological, Limulus Amoebocyte Lysate test [LAL]).

Address:

92 Antimony Street
Carole Park Qld 4300

Product types:

Category 2: Tablets, creams/lotions, ointments, pastes, powders, sprays, liquids, suspensions, and gels

Category 3: Liquids, sprays and powders

Category 4: Premix (powders), and supplements (powders)

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, tableting, tablet coating, filling, microbiological reduction treatment (heat), packaging, labelling, strip, blister or sachet packaging, secondary packaging, secondary labelling, analysis and testing (physical), storage, and release for supply.

Address: 

CSIRO Australian Centre for Disease Preparedness

5 Portarlington Road

Geelong VIC 3219

Product Types:

Category 1 – Immunobiologicals

Step(s) of manufacture:

Quality assurance (QA) of raw materials, sterilisation (chemical), microbiological reduction treatment (chemical), analysis and testing (chemical, physical, microbiological, sterility testing, immunobiological, polymerase chain reaction (PCR)), propagation in eggs (egg inoculation, incubation and ultracentrifugation), antigen harvest, purification and inactivation, storage and release for supply.

Date of issue:

28/11/2023

Address:

105 Norman Jones Lane
Alstonville NSW 2477

Product types:

Category 1 – tick antiserum and snake antivenoms

Step(s) of manufacture:

Quality assurance (QA) of raw materials, serum collection, management and immunisation of donor animals, formulation including blending, aseptic filling, sterilisation (heat and filtration), microbiological reduction treatment (heat, filtration and chemical), packaging and labelling, analysis and testing (physical), storage, and release for supply.

Address: 

81–89 Buckley Grove
Moolap VIC 3220

Product types:

Category 2: Powders and liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

11 Northcorp Boulevard
Broadmeadows VIC 3047

Product types:

Category 6 – rubber insert

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending (rubber compounding), rubber insert moulding, analysis and testing (physical), storage, packaging, labelling and release from manufacture only (partial release).

Address:

1019 Mountain Hwy
Boronia VIC 3155

Product types:

Category 2: Creams/lotions, ointment, pastes, gels, sprays, and liquid – topical.
Category 4: Premix – liquids, and supplements – liquid.

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

1 Baxter Drive
Old Toongabbie NSW 2146

Product types:

Category 1: Sterile products (liquids)

Step(s) of manufacture:

Formulation including blending, filling, packaging, labelling, sterilisation (heat), analysis and testing (physical, chemical, Limulus Amoebocyte Lysate test [LAL] and microbiological), storage and release for supply.

Address:

52 Antimony Street
Carole Park QLD 4300

Product types:

Category 2: Liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, filling, packaging, labelling, sterilisation (heat), analysis and testing (physical and microbiological), storage and release for supply.

Address:

50 Antimony Street
Carole Park QLD 4300

Product types:

Category 4: Premixes and supplements – powder

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, analysis and testing (physical) packaging, labelling, repackaging, relabelling, storage and release for supply.

Address:

11–15 Moores Road
Glenorie NSW 2157

Product types:

Category 1: Immunobiologicals, sterile diluents

Step(s) of manufacture:

Quality assurance (QA) of raw materials, management of donor animals, virus cultivation, mycoplasma cultivation, bacterial fermentation, oocyst antigen production, oocyst processing, formulation including blending, aseptic filling, filling, packaging, labelling, microbiological reduction treatment (heat, chemical, filtration), sterilisation (heat, chemical, filtration), freeze-drying, analysis and testing (physical, immunobiological, microbiological, oocyst counts), storage and release for supply

Address:

55 Dulacca Street
Acacia Ridge QLD 4110

Product types:

Category 4: Supplements (powders)

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, granulation, fermentation (bacterial and fungal), packaging, labelling, analysis and testing (physical and enzyme assay), storage, and release for supply.

Address:

Units 1–4, 2 Darnick Street
Underwood QLD 4119

Product types:

Category 6

Step(s) of manufacture:

Analysts and testing (physical, chemical, endotoxin, microbiological and sterility).

Address: 

2 Alloy Street
Yatala QLD 4207

Product Types:

Category 4: Hard shell

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, filling, packaging, labelling, repackaging (primary), relabelling (primary), sachet packaging (primary), tableting, tablet coating, capsule filling from bulk, analysis and testing (physical), and release for supply

Date of issue:

12/3/2021

Address:

20 Jubilee Avenue
Warriewood NSW 2102

Step(s) of manufacture:

Packaging, labelling and release for supply.

Address:

16–20 Baker Street
Banksmeadow NSW 2019

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, granulation, filling, tableting, tablet coating, capsule filling from bulk, packaging, labelling, blister packaging, sachet packaging, analysis and testing (physical), secondary / supplementary labelling, secondary packaging, storage, and release for supply.

Address: 

Units 3–5
352 Macaulay Road
Kensington Vic 3031

Product Types:

Category 6: Non-sterile dosage forms

Step(s) of manufacture:

Analysis and testing (microbiological)

Date of issue:

20/8/2020

Address: 

52-58 Mark Street
North Melbourne Vic 3051

Product Types:

Category 6: All dosage forms

Step(s) of manufacture:

Analysis and testing (chemical and physical)

Date of issue:

20/8/2020

Address:

2302, 30 Glen Street
Milsons Point NSW 2061

Product types:

Category 6

Step(s) of manufacture:

Release for supply.

Address:

217–221 Governor Road

Braeside VIC 3195

Product types:

Category 2

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, premixing in powder or granular form, filling, packaging, labelling, blister packaging, soft gelatine capsule manufacture, hard shell capsule manufacture, tableting, tablet coating, analysis and testing (physical and chemical), storage and release for supply.

Address:

5 William Street
Ferntree Gully VIC 3156

Product types:

Category 2: Gels, sprays, liquids (oral, topical), and suspensions.

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, filling, analysis and testing (physical, microbiological, endotoxin testing, and sterility testing), packaging, labelling, repackaging, relabelling, storage, and release for supply.

Address:

Unit 16, 84–92 Barnes Street
Tamworth NSW 2340

Product types:

Category 6

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, filling, packaging, sachet packaging, labelling, storage and release for supply.

Address:

11 Moores Road
Glenorie NSW 2157

Product types:

Category 1: Sterile products
Category 2: Creams, lotions, pastes, powders, granules, tablets and liquids
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, tableting, filling, aseptic filling, packaging, labelling, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), analysis and testing (physical and chemical), storage and release for supply.

Address:

Room 104, Building 485
Biyal Place
Charles Sturt University
Wagga Wagga NSW 2678

Product types:

Category 6 – all dosage forms

Step(s) of manufacture:

Storage only.

Address:

119 Magowar Road
Girraween NSW 2145

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical and chemical).

Address:

Units 1–4, 36 Curtis Road
Mulgrave NSW 2756

Product types:

Category 2: Creams, lotions, ointments, gels, pastes, powders, sprays, liquids and suspensions
Category 3: Liquids, sprays and powders
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, wet milling, filling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

86 Waterview Close
Dandenong South VIC 3175

Product types:

Category 2: Liquids

Category 3: Liquids, pastes, sprays and powders

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and microbiological), storage and release for supply.

Address:

5A/5B Jubilee Avenue
Warriewood NSW 2102

Product types:

Category 6 (Single-step manufacture) – non-sterile all dosage forms

Step(s) of manufacture:

Packaging, secondary packaging, labelling, secondary/supplementary labelling, repackaging and relabelling, storage and release for supply.

Address:

31–49 Nathan Road
Dandenong South VIC 3175

Product types:

Category 4: (Premixes and supplements) – supplements – powder, supplements – liquid, probiotics, coated and uncoated tablets and soft gel capsules

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, filling, packaging (primary and secondary), labelling (primary and secondary), blister packaging, sachet packaging, tableting, tablet coating, capsule filling from bulk, analysis and testing (physical, chemical, microbiological), storage and release for supply.

Address:

14 Kingston Drive
Helensvale QLD 4212

Product types:

Category 2: Creams/lotions, sprays, liquids, gels and ointments

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, testing and analysis (physical) and release for supply.

Address:

171–177 Woodpark Rd
Smithfield NSW 2164

Product types:

Category 2 – tablets, capsules soft; capsules hard; powders, granules, solid unit dosage forms, liquids
Category 4 – powder, liquids

Step(s) of manufacture:

Quality assurance of raw materials, formulation including blending, dry milling, wet milling, granulation, filling, tableting, tablet coating, capsule filling from bulk, packaging, repackaging, strip, blister, sachet packaging, labelling, relabelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

103–107 Potassium Street
Narangba QLD 4504

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and chemical), storage, and release for supply.

Address:

2 Rawlinson Street
O'Connor WA 6163

Product types:

Category 3 (Ectoparasiticides) – Liquids, sprays and powders.

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, aerosol filling from bulk, analysis and testing (physical and chemical), storage and release for supply.

Address:

24–26 Helen Street
Heidelberg Heights VIC 3081

Product types:

Category 2: Pastes, powders, and liquids
Category 4: Premixes liquid, and premixes powder

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

2 Cal Cl
Somersby NSW 2250

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, packaging, secondary packaging, labelling, secondary labelling, relabelling, strip, blister or sachet packaging, dry milling, wet milling, granulation, tableting, analysis and testing (physical), storage, and release for supply.

Address:

8 Warringah Close
Somersby NSW 2250

Product types:

Category 1: Sterile products for injection

Category 2: Creams / lotions, ointments, pastes, sprays, liquids and gels.

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, aseptic filling, packaging, labelling, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), analysis and testing (physical, chemical and microbiological), storage and release for supply.

Address: 

9 Chivers Road
Somersby NSW 2250

Product Types:

Category 6: All dosage forms

Step(s) of manufacture:

Quality assurance (QA) of raw materials, sampling, dispensing, secondary packaging, secondary labelling, analysis and testing (physical and chemical), and storage.

Date of issue:

24/7/2020

Address:

Corner of Taylor Street and Midland Highway
Epsom VIC 3551

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, formulation including blending, aseptic filling, sterilisation (heat and chemical), analysis and testing (physical, chemical, microbiological, sterility, immunobiological, serological and haemolysin assay), packaging, labelling, storage and release for supply.

Address:

7 Centenary Rd
Slacks Creek QLD 4127

Product types:

Category 1: Sterile and immunobiological products

Category 2: Creams/lotions and liquids

Category 3: Creams/lotions and liquids

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, aseptic filling, packaging, repackaging, labelling, relabelling, analysis and testing (physical, chemical and microbiological), storage and release for supply.

Address: 

16 Picrite Close
Greystanes NSW 2145

Product types:

Category 6: all dosage forms

Step(s) of manufacture:

Secondary packaging, secondary/supplementary labelling, storage, and release for supply.

Address:

1 Botero Place

Truganina VIC 3029

Product types:

Category 6 – all dosage forms

Step(s) of manufacture:

Storage only

Address:

1–7 Bell Gr
Braeside
VIC 3195

Licence No:

2276

Product types:

Category 2: Liquids – topical

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, packaging, secondary packaging, labelling, secondary labelling, analysis and testing (physical, chemical, and microbiological), storage, and release for supply.

Date of issue:

23/8/2023

Address:

41 Edison Road
Wagga Wagga NSW 2650

Product types:

Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address: 

6 Coronation Avenue
Kings Park NSW 2148

Product Types:

Category 4: Powders

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, sachet packaging, analysis and testing (physical), storage and release for supply.

Date of issue:

30/10/2020

Address:

32 Perivale Street
Darra QLD 4076

Product types:

Category 2: Liquids (topical)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, repackaging, relabelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

350 Reserve Road
Cheltenham VIC 3192

Product types:

Category 2: Liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical, chemical), repackaging, relabelling, storage and release for supply.

Address:

University of Melbourne
School of Veterinary Science
250 Princes Highway
Werribee VIC 3030

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (immunobiological).

Address:

7 Eden Park Drive
Macquarie Park NSW 2113

Product types:

Category 6: All dosage forms

Step(s) of manufacture:

Release for supply.

Address: 

657 Sandy Creek Road
Quorrobolong NSW 2325

Product Types:

Category 2: Pastes

Category 4: Powder

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, storage, packaging, labelling, release for supply

Date of issue:

18/8/2020

Address:

490–500 Wellington Road
Mulgrave VIC 3170

Product types:

Category 2: Sprays, suspensions and liquids
Category 3: Liquids and sprays
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, wet milling, filling, packaging, sachet packaging, labelling, aerosol filling from bulk, analysis and testing (physical, chemical, microbiological and antibiotic assay), storage and release for supply.

Address:

1st Floor
179 Magowar Road

Girraween NSW 2145

Step(s) of manufacture:

Analysis and testing (chemical).

Address:

179 Magowar Road

Girraween NSW 2145

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (antibiotic bioassay, microbiological, chemical, physical, sterility and endotoxin).

Date of issue:

28/6/2022

Address: 

6 Monterey Road
Dandenong South Vic 3175

Product Types:

Category 6: All dosage forms

Step(s) of manufacture:

Analysis and testing (physical, chemical, microbiological, and endotoxin).

Date of issue:

11/9/2020

Address: 

189 Mountford Road
Tragowel VIC 3579

Product Types:

Category 4: Supplements – powders, lick blocks, pellets

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, filling, packaging, labelling pellet extrusion, analysis and testing (physical), storage and release for supply.

Date of issue:

19/9/2024

Address: 

5 Ferngrove Place
South Granville NSW 2142

Product Types:

Category 2: Ointment, gel and cream
Category 4: Tablets, capsules (hard shell and soft), liquid, powder, granules

Step(s) of manufacture:

Quality assurance (QA) of raw materials, dry milling, granulation, filling, packaging, labelling, blister packaging, sachet packaging, tableting, tablet coating, capsule filling from bulk, analysis and testing (physical and chemical), storage and release for supply.

Date of issue:

27/11/2020

Address:

Lot 13 Enterprise Street
Maryborough QLD 4650

Product types:

Category 4: Supplements (powder) and block licks

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

T/A Radpharm Scientific
53–57 Oatley Court
Belconnen ACT 2617

Product types:

Category 1 (Immunobiologicals and sterile products) – Terminally sterilised products for injection (powder, solution and diluent)

Step(s) of manufacture:

Formulation including blending, filling, packaging, labelling, sterilisation (heat), microbiological reduction treatment (heat, and filtration), analysis and testing (physical, and chemical), storage and release for supply.

Address:

7–9 Amax Avenue
Girraween NSW 2145

Product types:

Category 2: Tablets, pellets, capsules (hard shell and soft gel), creams/lotions, ointments, pastes, powders, spray and liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, strip, blister and sachet packaging, soft gelatine capsule manufacture, tableting, pellet extrusion, capsule filling from bulk, analysis and testing (physical), storage and release for supply.

Address:

Unit 3, 30 Heathcote Road
Moorebank NSW 2170

Product types:

Category 6: (Single-step manufacture) – all dosage groups

Step(s) of manufacture:

Filling, packaging, labelling and storage.

Address:

43–65 Bellona Avenue
Regents Park NSW 2143

Product types:

Category 2: Tablets, capsules (hard-shell), creams, lotions, powders, sprays and liquids-oral.

Category 4: Supplements liquid, supplements powder.

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, filling, packaging, labelling, secondary packaging, secondary labelling, sachet packaging, tableting, capsule filling from bulk, analysis and testing (physical), relabelling, repackaging, storage, and release for supply.

Address:

59 Kirby Street

Rydalmere NSW 2116

Product types:

Category 4 - premixes and supplements

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, tableting, tablet coating, capsule filling from bulk, filling, packaging, sachet packaging, labelling, analysis and testing (physical), storage, and release for supply.

Address:

39–57 Wadhurst Drive,
Boronia VIC 3155

Product types:

Category 1: Sterile products for injection

Step(s) of manufacture:

Quality assurance (QA) of raw materials, Formulation including blending, Aseptic filling, Packaging, Labelling, Repackaging, Relabelling, Sterilisation (filtration), Analysis and testing (physical, chemical, endotoxin, microbiological) and Storage.

Address:

28 Horizon Drive
Beenleigh QLD 4207

Product types:

Category 2: creams / lotions, ointments, pastes, sprays, liquids and gels

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

18 Healey Circuit
Huntingwood, NSW 2148

Product types:

Category 2 – Creams/lotions, ointments, pastes, powders, pellets, sprays, tablets, bolus, and liquids
Category 3 – Liquids, sprays, and powders
Category 4 – Premixes, supplements, and probiotics

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, granulation, filling, packaging, labelling, pellet extrusion, tableting, analysis and testing (physical), secondary packaging, secondary labelling, repackaging, relabelling, storage and release for supply

Address:

Building 1, 19–23 Paramount Road
West Footscray VIC 3012

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (chemical).

Address:

91–105 Harpin Street
Bendigo East VIC 3550

Product types:

Category 1: lmmunobiologicals and sterile products

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, virus cultivation, formulation including blending, aseptic filling, filling, packaging, labelling, sterilisation (heat and filtration), microbiological reduction treatment (filtration), freeze-drying, analysis and testing (physical, chemical, sterility test, serological, immunobiological and microbiological), storage and release for supply.

Address:

110 Merrindale Drive
Croydon VIC 3136

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, filling, packaging, labelling, blister and sachet packaging, tableting, tablet coating, capsule filling from bulk, freeze drying, analysis and testing (physical and chemical), storage and release for supply.

Address: 

45 King Road
Hornsby NSW 2077

Product types:

Category 2: Creams / lotions, ointments, gels, pastes, sprays and liquids (oral and topical)

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, analysis and testing (chemical and microbiological) packaging, labelling, storage and release for supply.

Address:

85 Gardiner Street
Rutherford NSW 2320

Product types:

Category 1: Sterile products
Category 2: Tablets, creams/lotions, ointments, pastes, powders, sprays, liquids and suspensions
Category 3: Liquids, pastes, suspensions, sprays and powders

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, chemical synthesis, formulation including blending, granulation, wet milling, dry milling, filling, aseptic filling, packaging, labelling, strip, blister or sachet packaging, tableting, tablet coating, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), analysis and testing (physical, chemical, microbiological, sterility and endotoxin testing), storage and release for supply.

Address:

61 Chivers Road
Somersby NSW 2250

Product types:

Category 2: Tablets, pastes, liquids and suspensions.

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, filing, packaging, labelling, tableting, analysis and testing (physical and chemical), storage and release from manufacturing.

Address:

1/25 Wonderland Dr

Eastern Creek NSW 2766

Product types:

Category 2: tablets, capsules – hard shell, creams, lotions, ointments, liquids (oral and topical), powders, granules, sprays.
Category 3: liquids, powders, sprays.
Category 4: supplements (liquids and powders), probiotics, premix (liquid and powder).

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, filling, packaging, labelling, blister packaging, sachet packaging, tableting, tablet coating, capsule filling from bulk, analysis and testing (physical, chemical and microbiological), storage and release for supply.

Address:

27–49 Lenore Drive

Erskine Park NSW 2759

Product types: 

Category 6 – all dosage forms

Step(s) of manufacture: 

Secondary packaging, secondary labelling, storage and release for supply.

Address:

21 Reaghs Farm Road
Minto NSW 2566

Product types:

Category 2: Tablets, capsules, creams and lotions, liquids
Category 3: Liquids and powders
Category 4: Premixes

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, tableting, tablet coating, capsule filling from bulk, analysis and testing (physical, chemical and antibiotic assay), storage and release for supply.

Address:

1 Petcare Place
Wodonga VIC 3690

Product types:

Category 2: Palatable ingestible chews

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, filling, packaging, labelling, strip, blister or sachet packaging, microbiological reduction treatment (heat), analysis and testing (physical), storage and release for supply.

Address:

29–33 Rowland Street
Slacks Creek QLD 4127

Product types:

Category 1: Sterile products
Category 2: Tablets, powders, granules, sprays, liquids and gels
Category 3: Liquids, sprays and powders
Category 4: Premixes and supplements

Address:

Buildings 8 & 10
56 Smith Road
Springvale VIC 3171

Product types:

Category 2: Liquids (methoxyflurane only)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, chemical synthesis, filling, packaging, labelling, secondary packaging, secondary/supplementary labelling, storage and release for supply.

Address:

34 Law Court

Sunshine West VIC 3020

Product types:

Category 2

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling (bulk filling only), analysis and testing (physical and chemical), storage, packaging, labelling, release for supply.

Address:

6–8 England Street
Dandenong VIC 3175

Product types:

Category 6 – Powders

Step(s) of manufacture:

Wet milling of powders, dry milling of powders.

Address:

10 Activity Street
Warwick QLD 4370

Product types:

Category 2: Tablets, creams/lotions, ointments, pastes, granules, powders, sprays, liquids, gels and suspensions

Category 3: Liquids, pastes, sprays, powders and collars
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling of powders, wet milling, granulation, tableting, filling, packaging, labelling, strip, blister or sachet packaging, analysis and testing (physical and chemical—pH only), storage and release for supply.

Address:

Unit 4, 4 Skyline Place
Frenchs Forest NSW 2068

Product types:

Category 6

Step(s) of manufacture:

Secondary packaging, secondary labelling and release for supply.

Address:

22B Hanson Place
Eastern Creek NSW 2766

Product types:

Category 6: All dosage forms

Step(s) of manufacture:

Secondary packaging, secondary labelling, storage and release for supply.

Address:

112A Albatross Road
Nowra NSW 2541

Product types:

Category 2: Creams, lotions, ointments, pastes and liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address: 

Level 5, Building A

26 Talavera Road,

Macquarie Park NSW 2113

Product Types:

Category 6: All dosage forms

Step(s) of manufacture:

Release for supply

Date of issue:

11/9/2020

Address:

Unit 4, 25–37 Huntingdale Road
Burwood VIC 3125

Product types:

Category 6

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, packaging materials, storage and release for supply.

Address:

17 Woosters Lane
Nabiac NSW 2312

Product types:

Category 4: Premix (powder), supplement (powder) and probiotics

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

33 Manton Street
Morningside QLD 4170

Product types:

Category 4: Supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical), compression of lick blocks, storage and release for supply.

Address: 

100 Bosworth Road
Bairnsdale Vic 3875

Product Types:

Category 1: Immunobiologicals and sterile products for injection

Step(s) of manufacture:

Quality assurance (QA) of raw materials, plasma collection, management and immunisation of donor animals, formulation including blending, aseptic filling, analysis and testing (physical, chemical, endotoxin, microbiological, sterility, serological and immunological), sterilisation (filtration), packaging, labelling, storage, release from manufacture only (partial release), release for supply

Date of issue:

27/10/2020

Address: 

Factory 2, 3 Bray Street
Hastings VIC 3916

Product types:

Category 2: (Non-sterile veterinary preparations other than ectoparasiticides, premixes and supplements)—powders and liquids
Category 3: (Ectoparasiticides)—liquids and powders
Category 4: (Premixes and supplements)—premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, dry milling, packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

Unit 4
Century Estate
476 Gardeners Road
Alexandria NSW 2015

Product types:

Category 1: Sterile products

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, aseptic filling, packaging, labelling, sterilisation (heat, and filtration), microbiological reduction treatment (heat, chemical, and filtration), analysis and testing (physical, chemical, and endotoxin testing), storage, and release for supply.

Address:

19–25 Khartoum Road
Macquarie Park NSW 2113

Product types:

Category 1: Subcutaneous implants (terminally sterilised), subcutaneous implants (low-bioburden processing) and freeze dried peptides (low-bioburden processing).

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, physico-chemical conditioning, formulation including blending, dry milling, granulation, freeze-drying, tableting, pellet extrusion, low bioburden filling, packaging, sachet packaging, labelling, analysis and testing (physical, chemical), storage and release for supply.

Address:

4 Corporate Boulevard
Bayswater VIC 3153

Step(s) of manufacture:

Analysis and testing (physical and chemical).

Address:

914 Croobyar Road
Milton NSW 2538

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, tableting, pellet extrusion, filling, capsule filling from bulk, manufacture of hormone impregnated sponges, packaging, labelling, analysis and testing (physical), storage, and release for supply.

Address:

54 Edison Crescent
Baringa, QLD 4551

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, analysis and testing (physical), packaging, labelling, repackaging, relabelling, storage, and release for supply.

Address:

17–19 Orion Road
Lane Cove West NSW 2066

Product types:

Category 1: Sterile products (liquids)
Category 2: Liquids

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, aseptic filling, packaging, labelling, secondary packaging / labelling, sterilisation (filtration, heat), analysis and testing (physical, microbiological, endotoxin, and sterility), storage, and release for supply.

Address:

6 Distribution Drive
Orchard Hills NSW 2748

Product types:

Category 6: All dosage forms

Step(s) of manufacture:

Quality assurance (QA) of raw materials, labelling, relabelling, storage and release for supply.

Address:

'Rigby', 6066 Cunningham Highway
Kalbar QLD 4309

Product types:

Category 1: Immunobiologicals (plasma products and canine red blood cells (RBC))

Step(s) of manufacture:

Quality assurance (QA) of raw materials, plasma collection via plasmapheresis machine, blood collection, management and immunisation of donor animals, aseptic filling, packaging, labelling, microbiological reduction treatment (filtration), analysis and testing (physical, sterility, serological, immunobiological, and haematological), storage and release for supply.

Address:

Unit 1
148 Tennyson Memorial Avenue
Tennyson QLD 4105

Product types:

Category 6 (Single-step manufacture) – all dosage forms

Step(s) of manufacture:

Analysis and testing (physical and chemical)

Address:

T/A Conmac Laboratory Services
6 Glasson Drive
Bethania QLD 4205

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical, antibiotic assay and microbiological).

Address:

83 Cherry Lane

Laverton North, VIC 3026

Product types:

Category 2 – Capsules – hard shell, Tablets, Liquids (oral and topical), Creams/Lotions, Ointment, Gels, Pastes, Powders, Granules, Sprays, Suspensions

Category 3 – Powders, Pastes, Liquids, Sprays

Category 4 – Premix (liquid and powder), Supplements (liquid and powder), Probiotics

Step(s) of manufacture:

Quality assurance (QA) of raw materials, Formulation including blending, Dry milling, Wet milling, Granulation, Filling, Packaging (including sachet and blister packaging) Labelling, Tableting, Tablet coating, Capsule filling from bulk, Analysis and testing (Physical and Chemical), Storage and Release for supply.

Date of issue:

13/7/2022

Address:

Unit 10, 222 Wisemans Ferry Rd
Somersby, NSW 2250

Product types:

Category 6 – Powders

Step(s) of manufacture:

Secondary packaging, secondary labelling, relabelling, storage and release for supply

Address:

6 Elliott Road
Dandenong VIC 3175

Product types:

Category 4: Premixes and supplements

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, filling, packaging, labelling, analysis and testing (physical), storage, and release for supply.

Address:

118 Links Avenue South

Eagle Farm QLD 4009

Product types:

Category 2: Tablets, creams, lotions, ointments, pastes, gels, powders, sprays, liquids and suspensions

Category 3: Liquids, sprays, powders, and tablets (soluble for aquarium)

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, filling, tableting, packaging, labelling, secondary packaging, secondary labelling, relabelling, blister packaging, analysis and testing (physical), storage and release for supply.

Address:

10–12 Green Street
Banksmeadow NSW 2019

Product types:

Category 2: (Non-sterile veterinary preparations other than ectoparasiticides, and premixes and supplements)—powders and liquids
Category 3: (Premixes and supplements)—supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, storage and release for supply.

Address:

7–11 Burr Court
Laverton North VIC 3026

Product types:

Category 6: Single step manufacture – all dosage forms

Step(s) of manufacture:

Quality assurance (QA) of raw materials, labelling, storage and release for supply.

Address:

2 Swettenham Road
Minto NSW 2566

Product types:

Category 6: Single step manufacture – all dosage forms

Step(s) of manufacture:

Quality assurance (QA) of raw materials, labelling, storage and release for supply.

Address: 

70–80 Bald Hill Road
Pakenham VIC 3810

Product types:

Category 6

Step(s) of manufacture:

Storage and release for supply.

Address:

Unit 7, 5 Belconnen Crescent

Brendale QLD 4500

Product types:

Category 6: All dosage forms

Step(s) of manufacture:

Analysis and testing (chemical and physical).

Address:

Unit 2, 12 Blackmore Road
Smeaton Grange NSW 2567

Product types:

Category 2: Liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

Unit 4, 26 Kent Road
Mascot NSW 2020

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, labelling, storage and release for supply.

Address:

Unit 23, 30–32 Perry Street
Matraville NSW 2036

Step(s) of manufacture:

Quality assurance (QA) of raw materials, labelling, storage, and release for supply.

Address:

64 Blanck Street
Ormeau QLD 4208

Product types:

Category 6: all dosage forms

Step(s) of manufacture:

Analysis and testing (physical and chemical).

Address:

A/G AS Trustee for Chem-Chrom Laboratories and Services
Unit 15, 10–12 Montore Road
Minto NSW 2566

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical and microbiological).

Address:

39–79 Poplar Road
Parkville VIC 3052

Product types:

Category 1: Immunobiologicals and sterile products

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, aseptic filling, packaging, labelling, freeze drying, sterilisation (filtration), microbiological reduction treatment (filtration), analysis and testing (physical, chemical, endotoxin, microbiological, sterility testing, serological, immunobiological) and storage.

Address:

18–20 King Street
Blackburn VIC 3130

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (microbiological and sterility test).

Address:

Unit C2 Regents Park Estate
391 Park Road
Regents Park NSW 2143

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (microbiological).

Address:

Southern Cross Plant Science Analytical Services
Level 3, T-Block
Military Road
Lismore NSW 2480

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical, metals).

Address:

1/2 Aurnga Drive

Beresfield NSW 2322

Product types:

Category 2: liquids, powders, gels and pastes

Category 4: pastes and powders

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, repackaging, relabelling, storage and release for supply.

Address:

Biosecurity Sciences Laboratory
39 Kessels Road
Coopers Plains QLD 4108

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (serological, immunological, virological (vaccine potency and purity testing).

Address:

Tick Fever Centre
280 Grindle Rd
Wacol QLD 4076

Product types:

Category 1: Immunobiologicals

Step(s) of manufacture:

Quality assurance (QA) of raw materials, management and inoculation of donor animals, blood collection, formulation including blending, aseptic filling, filling, packaging, labelling, analysis and testing (physical, sterility, microbiological, and serological), storage, and release for supply.

Address:

5 Widemere Road
Wetherill Park NSW 2164

Product types:

Category 6

Step(s) of manufacture:

Sterilisation (radiation and gas).

Address:

160 South Gippsland Highway
Dandenong VIC 3175

Product types:

Category 6

Step(s) of manufacture:

Sterilisation (radiation).

Address:

180–186 Potassium Street
Narangba QLD 4504

Product types:

Category 6

Step(s) of manufacture:

Sterilisation (radiation).

Address:

21 Titan Drive
Mickleham VIC 3064

Product types:

Category 6 (Single-step manufacture): all dosage forms.

Step(s) of manufacture:

Sterilisation (radiation).

Address:

192 Dalwood Road
Alstonville NSW 2477

Product types:

Category 1: Immunobiologicals (tick antiserums) and immunobiologicals (snake antivenoms)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, management and immunisation of donor animals, serum collection, formulation including blending, aseptic filling, packaging, labelling, sterilisation (heat, filtration), microbiological reduction treatment (heat, filtration), analysis and testing (physical), storage and release for supply.

Address:

185 Allambie Road
Allambie Heights NSW 2100

Product types:

Category 6

Step(s) of manufacture:

Secondary packaging, secondary/supplementary labelling, storage and release for supply.

Address:

52 Brandl Street
Eight Mile Plains QLD 4113

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (chemical).

Address:

2 Sirius Road
Lane Cove West NSW 2066

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (physical, chemical and microbiological).

Address:

27 Healey Road
Dandenong VIC 3175

Product types:

Category 1: Sterile products
Category 2: Creams/lotions, ointments, pastes, powders and liquids

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, wet milling, packaging, labelling, repackaging, relabelling, microbiological reduction treatment (filtration and heat), sterilisation (heat), analysis and testing (physical, chemical, microbiological, endotoxin and sterility testing), storage, release from manufacture only (partial release) and release for supply.

Address:

2 Blackmore Road
Smeaton Grange NSW 2567

Product types:

Category 2: Creams/lotions, ointments, gels, pastes, sprays and liquids
Category 4: Premixes (liquids) and supplements (liquids)

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, wet milling, filling, packaging, labelling, analysis and testing (physical and chemical), storage and release for supply.

Address:

19A Garema Circuit
Kingsgrove NSW 2208

Product types:

Category 2: Tablets, creams/lotions, ointments, pastes, powders, liquids, suspensions and gels

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, dry milling, wet milling, granulation, filling, packaging, labelling, strip, blister or sachet packaging, tableting, tablet coating, analysis and testing (physical and chemical) storage and release for supply.

Address:

Unit 76, Powers Business Park
45 Powers Rd
Seven Hills NSW 2147

Product types:

Category 1: Immunobiologicals

Step(s) of manufacture:

Quality assurance (QA) of raw materials, bacterial fermentation, fungal fermentation, wart tissue extraction, pilot scale affinity chromatography, formulation including blending, aseptic filling, packaging, labelling, sterilisation (chemical, filtration, and heat), microbiological reduction treatment (chemical, filtration, and heat), analysis and testing (chemical, microbiological, physical, protein biochemistry, serological, sterility testing, vaccine safety testing), storage, and release for supply.

Address:

37 Glendenning Road
Glendenning NSW 2761

Product types:

Category 1: Sterile products and terminally sterilised ointment
Category 2: Tablets, creams / lotions, ointments, gels, pastes, powders, sprays, granules, suspensions, and liquids
Category 3: Liquids and sprays
Category 4: Supplements

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, granulation, dry milling, wet milling, aseptic filling, filling, packaging (including strip, blister and sachet), secondary packaging, labelling, secondary labelling, tableting, sterilisation (chemical, heat and filtration), microbiological reduction treatment (heat, filtration and chemical), analysis and testing (physical, chemical, microbiological, and endotoxin), storage, and release for supply.

Address:

250 Princes Highway
Werribee VIC 3030

Product types:

Category 6

Step(s) of manufacture:

Analysis and testing (microbiological and immunobiological).

Address:

Reproductive and Metabolic Endocrinology Laboratory
School of Science and Technology
University of New England
Armidale NSW 2351

Product types:

Category 6

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, analysis and testing (physical, chemical, pharmacological and immunological).

Address:

50 Webb Street
Bomen NSW 2650

Product types:

Category 2: Tablets, bolus, gels, powders, liquids and medicated seed

Category 3: Liquids and sprays

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, filling, granulation, dry milling, vacuum drying, tableting, packaging, secondary packaging, repackaging, labelling, secondary labelling, relabelling, analysis and testing (chemical, physical and antibiotic assay), storage, and release for supply.

Address:

39 Harris Street
St Marys NSW 2760

Product types:

Category 2: Pastes, powders, liquids, granules, and capsules (hard shell)
Category 3: Liquids and powders 
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, wet milling, dry milling, granulation, filling, capsule filling from bulk, packaging, labelling, sachet packaging, analysis and testing (physical and chemical), storage and release for supply.

Address:

41 Harris Street
North St Marys NSW 2760

Product types:

Category 1: Sterile products

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, aseptic filling, sterilisation (heat and filtration), microbiological reduction treatment (heat and filtration), packaging, labelling, analysis and testing (physical), storage and release for supply.

Address:

83 Maffra St
Coolaroo VIC 3048

Product types:

Category 2: Liquids (oral) and sprays

Step(s) of manufacture:

Quality assurance (QA) of raw materials, formulation including blending, analysis and testing (physical and chemical), filling, packaging, labelling, repackaging, relabelling, storage and release for supply.

Address:

2152 Castlereagh Road
Penrith NSW 2750

Product types:

Category 1: Immunobiologicals and sterile products
Category 2: Liquids and suspensions

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, bacterial fermentation, formulation including blending, filling, aseptic filling, packaging, labelling, sterilisation (heat, filtration, chemical), microbiological reduction treatment (heat, chemical), analysis and testing (physical, chemical, microbiological, sterility testing, antibiotic assay, immunobiological, serological), storage and release for supply.

Address:

18–22 Denison Street
Crookwell NSW 2583

Product types:

Category 2: (Non-sterile veterinary preparations other than ectoparasiticides, premixes and supplements)—tablets, pastes, sprays, liquids, suspensions, creams/lotions, ointments, gels, granules and powders
Category 3: (Ectoparasiticides)—liquids, pastes and sprays
Category 4: (Premixes and supplements)—premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, granulation, wet milling of powders, dry milling, filling, packaging, labelling, strip, blister and sachet packaging, tableting, analysis and testing (physical and chemical) and storage.

Address:

361 Horsley Road
Milperra NSW 2214

Product types:

Category 6: (single step manufacture) – all dosage forms

Step(s) of manufacture:

Quality assurance (QA) of packaging materials, storage and release for supply.

Address:

211 Victoria Road
Dundas NSW 2117

Product types:

Category 6

Step(s) of manufacture:

Secondary packaging and secondary labelling.

Address:

444 Albany Highway
Albany WA 6330

Product types:

Category 1: Immunobiologicals and sterile products for injection

Step(s) of manufacture:

Quality assurance (QA) of raw materials, collection and preparation of nematodes (all stages), antigen extraction, management of donor animals, formulation including blending, wet milling, sterilisation (heat, filtration), microbiological reduction treatment (filtration), aseptic filling, packaging, labelling, analysis and testing (physical, chemical, immunobiological, serological), storage and release for supply.

Address:

7 Koojan Avenue
South Guildford Perth WA 6055

Product types:

Category 2: Liquids
Category 3: Liquids and powders
Category 4: Premixes and supplements

Step(s) of manufacture:

Quality Assurance (QA) of raw materials, formulation including blending, filling, packaging, labelling, analysis and testing (chemical and physical), storage and release for supply.

Address:

45 Poplar Road
Parkville VIC 3052

Product types:

Category 1: Immunobiologicals and sterile products

Step(s) of manufacture:

Quality assurance (QA) of raw materials, bacterial fermentation, virus cultivation, propagation of genetically modified mammalian cells, extraction and purification of viral protein, peptide conjugation, formulation including blending, aseptic filling, filling, packaging, labelling, sterilisation (heat, and filtration), microbiological reduction treatment (heat, and filtration), freeze drying, secondary packaging, secondary labelling, repackaging, relabelling, storage, and release for supply.